nodeMCU dimmer/switch/temp.sensor without arduino

yes i connect pin dht11 out to gpio2..

i see so many build of 0.9.5 in here .. github.com/nodemcu/nodemcu-firmware/tree/master/pre_build/0.9.5

which version do you use?

cdj wrote: I use 0.9.5 and not the last. Are you using gpio2?

please upload the firmware you used, i have try almost all nodeMCU firmware, but none of them work.. please..

thanks

I can't now... i've my router broken and internet down, but it is in standard nodemcu github repository....bmp180 lua script is difficult to compile without a certain firmware... but dht22 lua script work with all 0.9.5 firmware that 've tested.

cdj wrote: I can't now... i've my router broken and internet down, but it is in standard nodemcu github repository....bmp180 lua script is difficult to compile without a certain firmware... but dht22 lua script work with all 0.9.5 firmware that 've tested.

which one from this you used?
github.com/nodemcu/nodemcu-firmware/releases/tag/0.9.5_20150318

i test both of them (float and integer) but after i upload init.lua and dht22.lua, it always rebooting..

github.com/nodemcu/nodemcu-firmware/blob...nodemcu_20150123.bin

This work also with bmp180

cdj wrote: github.com/nodemcu/nodemcu-firmware/blob...nodemcu_20150123.bin

This work also with bmp180

are you sure its a correct firmware? its only 33k size compare others 440k..

i flashed succes but esplorer cant connect..