ESP8266 WiFi touch screen thermostat

9 years 7 months ago #1194 by cdj
I've solved downloading a parallel version of 1.0.6 (zip version)... It runs perfectly togheter with 1.6.3 installed too...

Please Log in or Create an account to join the conversation.

9 years 6 months ago #1204 by EasyIoT

cdj wrote: I've solved downloading a parallel version of 1.0.6 (zip version)... It runs perfectly togheter with 1.6.3 installed too...


Yes, good idea. I have also 2 Arduino IDE one for ESP and one for regular Arduino.

Please Log in or Create an account to join the conversation.

9 years 6 months ago #1365 by cdj
Excuse me Mr.EasyIoT, are you sure that thermostat sketch works with new esp library and new firmware? (also tried with a brand new esp with old firmware...same result)

I've rebuild everything today, this time with soldered cable direct to shield and esp give me the same error :

Response->timeout
hwReset
E_CWMODE
Send cmd:AT+CWMODE=1

 vÈÌÿa+ÿL'BRxøÊpxäÄAŸ$=aÀ@†(Thinker Technology Co Ltd.

ready
Response->timeout
E_CWMODE
Send cmd:AT+CWMODE=1

Response->timeout
hwReset
E_CWMODE
Send cmd:AT+CWMODE=1

0YÆÇùa+ßLgÊ|øÊt|äÄAƒ8³a€@†Thinker Technology Co Ltd.

Tried also TIME sketch...same result.... frustrating response timeout.....

Thanks
Dario

Please Log in or Create an account to join the conversation.

9 years 6 months ago #1388 by EasyIoT

cdj wrote: Excuse me Mr.EasyIoT, are you sure that thermostat sketch works with new esp library and new firmware? (also tried with a brand new esp with old firmware...same result)

I've rebuild everything today, this time with soldered cable direct to shield and esp give me the same error :


Response->timeout
hwReset
E_CWMODE
Send cmd:AT+CWMODE=1

 vÈÌÿa+ÿL'BRxøÊpxäÄAŸ$=aÀ@†(Thinker Technology Co Ltd.

ready
Response->timeout
E_CWMODE
Send cmd:AT+CWMODE=1

Response->timeout
hwReset
E_CWMODE
Send cmd:AT+CWMODE=1

0YÆÇùa+ßLgÊ|øÊt|äÄAƒ8³a€@†Thinker Technology Co Ltd.

Tried also TIME sketch...same result.... frustrating response timeout.....

Thanks
Dario


Works with ESP8266 library and correct firmware version. Tested yesterday.

In your case it's strange that after Send cmd:AT+CWMODE=1 your ESP resets??
See:
vÈÌÿa+ÿL'BRxøÊpxäÄAŸ$=aÀ@†(Thinker Technology Co Ltd.

Please Log in or Create an account to join the conversation.

9 years 6 months ago - 9 years 6 months ago #1451 by illwill
i came here originally because i was using 1.6.3 and i got these errors
fatal error: SevenSegNumFontPlus.h: No such file or directory
fatal error: SevenSeg_XXXL_Num.h: No such file or directory
fatal error: arial_normal.h: No such file or directory

i downgraded to older ide 1.0.6. everything compiled perfect. i dont have any sensors attached yet but i do see the graphics on the screen. if i press the button theres no responses, does it need sensors just to go into settings?

Please Log in or Create an account to join the conversation.

9 years 6 months ago #1466 by rglide
I have the same issue with the touch screen as well with no sensors connected. I am trying to get some connected this weekend to see if that will solve my problem but I dont think that is the issue. I have calibrated my screen so the touches are working but not in the code.

Please Log in or Create an account to join the conversation.

Time to create page: 0.472 seconds

Forum latest

  • No posts to display.