Current supported types
9 years 9 months ago #305
by EasyIoT
Yes, it's already implemented in beta V0.7. Soon I will release beta and you can test it.
Replied by EasyIoT on topic Current supported types
freol wrote: Hi,
Any plans on adding the S_POWER and S_FLOW types in future releases?
Yes, it's already implemented in beta V0.7. Soon I will release beta and you can test it.
Please Log in or Create an account to join the conversation.
9 years 9 months ago #386
by wergeld
Replied by wergeld on topic Current supported types
Will V_VOLTAGE be coming soon?
Please Log in or Create an account to join the conversation.
9 years 9 months ago #390
by EasyIoT
Replied by EasyIoT on topic Current supported types
I've just prepared beta without V_VOLTAGE. If you just asked me day before...
What sensor type is for V_VOLTAGE? S_POWER?
What sensor type is for V_VOLTAGE? S_POWER?
Please Log in or Create an account to join the conversation.
9 years 9 months ago #393
by wergeld
Replied by wergeld on topic Current supported types
It is to monitor the sensor battery voltage (from
github.com/mysensors/Arduino/blob/master...eryPoweredSensor.ino
). I did more digging and I found that you are using gw.sendBatteryLevel(batLevel) (from
iot-playground.com/10-low-power-door-window-sensor
).
Of course I found that after I put my test system "in the wild" last night. This evening I will try with gw.sendBatteryLevel if that is still possible.
Of course I found that after I put my test system "in the wild" last night. This evening I will try with gw.sendBatteryLevel if that is still possible.
Please Log in or Create an account to join the conversation.
9 years 7 months ago #950
by osalval
Replied by osalval on topic Current supported types
And the Roller shutter control to manage lights levels.
S_COVER, V_UP, V_STOP and V_DOWN
S_COVER, V_UP, V_STOP and V_DOWN
Please Log in or Create an account to join the conversation.
9 years 2 months ago #2204
by 1andweb
Replied by 1andweb on topic Current supported types
Hi,
I am trying to run a water flow meter using example from mysensors.org. I have the node registered and the pulsefactor changed accordingly. The example is using V_VAR1 to record in thr GW the pulses from the flowmeter. It seems that V_VAR1 is not implemented in server 0.8 so volumen accumulated is lost if node restart.
Are you planing to implement V_VARx types in next beta?
Thanks for the controller...good job!!
I am trying to run a water flow meter using example from mysensors.org. I have the node registered and the pulsefactor changed accordingly. The example is using V_VAR1 to record in thr GW the pulses from the flowmeter. It seems that V_VAR1 is not implemented in server 0.8 so volumen accumulated is lost if node restart.
Are you planing to implement V_VARx types in next beta?
Thanks for the controller...good job!!
Please Log in or Create an account to join the conversation.
Time to create page: 0.204 seconds
Forum latest
- No posts to display.