enigma wrote: HI All,
Found out that the connection drawing has a fault, the reed switch should be hooked to GND and not to VCC, because of the help from you guys, I was able to check it with Putty.
The sensor digitalvalue is changing now from a 1 to a 0 and visa versa.
Now I know the ESP8266 is working.
STILL HAVE THIS PROBLEM the door is not going open or closed, please what could be the problem, must be in an around the webserver.
All suggestions are very welcome.
Thanks in advance
with kind regards
leolopezglez wrote: on the server .exe black screen if you send call http : // [IP ] / Api / EasyIoT / Control / Module / Virtual / [ module address] / ControlOff /
http : // [IP ] / Api / EasyIoT / Control / Module / Virtual / [ module address] / ControlOn / and if you upgrade but appear open or closed : ((( (
leolopezglez wrote: if you upgrade the flag but not the legend appears open or closed..
here I leave a picture of my problem