Crontab + Automation public void Run(): Don't work

But, depending what you want to achieve, it seems that it is more adequate to use EventHelper to detect changing in Inputs and react with Driver Helper.Process Command. So you should use:
public void Setup()
{
EventHelper.ModuleChangedHandler((o, m, p) =>

also

After 1 week testing the problem is solved!

Thank you EasyIoT

if for simple rule i think its enaugh stay test my own, but just 2 cron per gpio, 2 executed time, just for my light . i will report it here.
I have use other software, i must control 7 3 phase motor pump, were it start stop with some rules.
I like this soft coz have build in sms gateway, good job im apreciated it.
Waiting the code open to publick

for days 2 all totally not working, i have restart my raspberry. every day. but nothing good news
i use new update from rar (easyiot_rpi_v0_9b1.rar) im install it manualy, not use image file then burn with win32diskimage.
I dont know whats wrong with my system. im will try again even it have 7 day run.

i will report the progress

Just to be sure, after install EasyIoT v0.9b1, you must:

Download following file and replace EasyIoT.exe in easyiot folder. It should work. File is compiled for latest beta v0.9b1.
iot-playground.com/swdownload/betaV0_9/EasyIoT.exe

As EasyIot put the link in this TOPIC, page 3

I have update it. Not working. i have reboot 5 times for this day. try to download with img file from official.