Low Power Door/sensor Version mismatch

5 years 5 months ago #3206 by neofox2k
I am triying to get it working, but I have always this problem
2016-04-13T15:52:56.8691570+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.8700320+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.8801530+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.8810120+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.8911530+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.8920750+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.9021560+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.9030110+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.9131580+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.9140440+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.9241710+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.9251210+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:57.0161590+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:57.0172970+02:00 DEBUG MySensors Version mismatch


I am download MySensor from your git repository and I am using Arduino IDE 1.5.8

any Ideas?

Thanks

Please Log in or Create an account to join the conversation.

5 years 5 months ago #3216 by williot
I have just had the same problem and tracked it down to the entry in MyConfig.h for the channel which was set to 95, I changed it to 90 and its now working fine.

Please Log in or Create an account to join the conversation.

5 years 4 months ago #3221 by EasyIoT

neofox2k wrote: I am triying to get it working, but I have always this problem
2016-04-13T15:52:56.8691570+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.8700320+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.8801530+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.8810120+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.8911530+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.8920750+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.9021560+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.9030110+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.9131580+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.9140440+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:56.9241710+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:56.9251210+02:00 DEBUG MySensors Version mismatch
2016-04-13T15:52:57.0161590+02:00 DEBUG MySensors Read: 0-0-0 s=0,c=0,t=0,pt=0,l=0:
2016-04-13T15:52:57.0172970+02:00 DEBUG MySensors Version mismatch


I am download MySensor from your git repository and I am using Arduino IDE 1.5.8

any Ideas?

Thanks


Which MySensors library do you use? EasyIoT Server currently supports MySensors 1.4.

Please Log in or Create an account to join the conversation.

5 years 4 months ago #3223 by williot
In my reply above I said I had cracked the problem and all was working fine, this was true for the sensor but I am still getting the same error message on the console "MySensors Version mismatch".

Any thoughts. Using ide 1.6.8 sensor library 1.4

Thanks

Please Log in or Create an account to join the conversation.

5 years 4 months ago #3226 by neofox2k
I have tested with all combinations of arduino 1.5.8 and 1.6.8 and MySernsor 1.4, 1.4.1, 1.4.2
Finnaly aparently I solved the problem reinstalling de EasyIotServerV0.9.iso for raspberry pi, but It was still not working right.

I think that my problem was that I was running an arduino with 5V and Its necesary to use a voltage regulator to connect the nrf24
www.mysensors.org/build/connect_radio

I have connected the arduino and the nrf24 with this
chioszrobots.com/2014/06/04/socket-adapt...l01-wireless-module/

Now It seem is working right but It is still in tests.

Willow, are you running on 1,8V arduino modified? or a normal one?

Please Log in or Create an account to join the conversation.

5 years 4 months ago #3228 by williot
Hi Neofox
At the moment I am using an unmodified 3.3v mini pro, I am running the nrf24 at 3.3v . I will try reloading the server image to see if that makes a difference.

I have started to modify a mini for 1.8v working, have done the hardware mods, just trying to program the fuses which is not working at the moment. I am using a uno as the programmer which works fine I can program a sketch to the mini using the ide. When I try to program the fuses using avrdude I get an error saying

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x03

Have you got one working at 1.8v yet?

Please Log in or Create an account to join the conversation.

Time to create page: 0.245 seconds