- Posts: 38
- Thank you received: 1
Mysensors electricity meter
8 years 9 months ago #2966
by seston
Mysensors electricity meter was created by seston
I use
this
sketch . Arduino mini pro 3,3v + photoresistor module. Easyiot server working in Raspberry pi. Raspberry find this and add to group. Or ask from mysensors forum ?
2016-02-20T17:38:59.5311480+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:39:19.5652760+02:00 DEBUG MySensors Read: 0-0-0 s=1,c=2,t=24,pt=0,l=3:1.4
2016-02-20T17:39:19.5659900+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:39:39.5982990+02:00 DEBUG MySensors Read: 0-0-0 s=1,c=2,t=24,pt=0,l=3:1.4
2016-02-20T17:39:39.5991050+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:38:59.5311480+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:39:19.5652760+02:00 DEBUG MySensors Read: 0-0-0 s=1,c=2,t=24,pt=0,l=3:1.4
2016-02-20T17:39:19.5659900+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:39:39.5982990+02:00 DEBUG MySensors Read: 0-0-0 s=1,c=2,t=24,pt=0,l=3:1.4
2016-02-20T17:39:39.5991050+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
Please Log in or Create an account to join the conversation.
8 years 8 months ago #2980
by EasyIoT
Use only supported data types in EasyIoT server MySensors driver. Not all MySensors data types are supported. If you miss some data type use for example V_TEMP and then replace image in sensor presentation. It will work.
That's why in EasyIoT Cloud version there are no data types - it is unnecessary complication. You define later what data means and how to display it.
Replied by EasyIoT on topic Mysensors electricity meter
seston wrote: I use this sketch . Arduino mini pro 3,3v + photoresistor module. Easyiot server working in Raspberry pi. Raspberry find this and add to group. Or ask from mysensors forum ?
2016-02-20T17:38:59.5311480+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:39:19.5652760+02:00 DEBUG MySensors Read: 0-0-0 s=1,c=2,t=24,pt=0,l=3:1.4
2016-02-20T17:39:19.5659900+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
2016-02-20T17:39:39.5982990+02:00 DEBUG MySensors Read: 0-0-0 s=1,c=2,t=24,pt=0,l=3:1.4
2016-02-20T17:39:39.5991050+02:00 ERROR MySensors Rx: Invalid data type:0 ,sensor:1, type:24
Use only supported data types in EasyIoT server MySensors driver. Not all MySensors data types are supported. If you miss some data type use for example V_TEMP and then replace image in sensor presentation. It will work.
That's why in EasyIoT Cloud version there are no data types - it is unnecessary complication. You define later what data means and how to display it.
Please Log in or Create an account to join the conversation.
8 years 8 months ago #2984
by seston
Replied by seston on topic Mysensors electricity meter
After work i change this and write from results.
Please Log in or Create an account to join the conversation.
8 years 8 months ago - 8 years 8 months ago #2985
by seston
Replied by seston on topic Mysensors electricity meter
I do not find this V_Temp. This is not for me. Too complex
Last edit: 8 years 8 months ago by seston.
Please Log in or Create an account to join the conversation.
Time to create page: 0.158 seconds
Forum latest
- No posts to display.